-
Reaper Attachments SSR-74 Brush Cutter is an aggressive clearing attachment to add to your land clearing arsenal. With our state of the art engineering this attachment is one of the most well balanced, hardest hitting clearing mower out there. Nothing compares to this skidsteer attachment. The blade design is a piece of CNC machined art work with a designed purpose at every turn meant to reduce projectiles while increasing the efficiency to clear everything in its path with ease. With its clear bullet rated poly-carbonate shield the operator can safely see what is in the cutting path as it is approached. The Anti- Kick Out Serration (See Above Photo) look cool but they are actually designed and placed to grab and hold trees & brush so it can be cut properly instead of being kicked out from blade impact much like a ratchet system. A front gate cover can also be purchased to cover the opening if you’re in an area where projectiles are a major concern or working with just small brush and need to mulch material finer. Reaper Attachments SSR-74 Brush Cutter, like all the products we manufacture and sell from the top to bottom this is precision quality craftsmanship at its finest with attention to detail from every angle all the way down to the hand inspected zinc plated drive housing.
Reaper Attachments SSR-74
-
SSR-60 Rotary Brush Cutter is a compact yet aggressive clearing attachment to add to your land clearing arsenal. With our state of the art engineering this attachment is one of the most well balanced, hardest hitting clearing mower out there for its size. The SSR-60 Rotary Brush Cutter is the little brother to our SSR-74 but don’t be deceived dynamite comes in small packages! Built using the same precision & high quality drive system as its big brother its smaller size offers a little more agility for maneuvering in tight places around trees or clearing on steep slopes along with a little lighter weight without sacrificing strength or integrity. Blade design is a piece of CNC machined art work with a designed purpose at every turn meant to reduce projectiles while increasing the efficiency to clear everything in its path with ease. With its clear bullet rated poly-carbonate shield the operator can safely see what is in the cutting path as it is approached.
Reaper Attachments SSR-60 Skidsteer Brush Mowing Attachment
-
Reaper Attachments EXF-40 Brush Cutter
The Reaper Attachments Brush Cutter EXF-40 is designed for the slightly bigger to heavy compact excavators but we have meticulously redesigned it to be lighter than any other comparable flail brush cutter out on the market today yet retaining higher strength! This excavator / backhoe attachment is balanced to the point its quieter than most cars! Listen to it hmm! Some companies try to showcase their level of balance with a heavy half full jar to keep it from moving around... well not us. We use a completely empty can that can move with the slightest imbalance and it’s 10 times more sensitive. Watch our empty pop can test, that just how quiet and smoothly balanced these attachments are. It works great for grass, small under brush and shrubs as well as small trees. The 2 lbs. blades are designed to both cut and mulch. The EXF-40 Brush Cutter is a blast to watch working. Clear that fence line in no time at all. The Brush Cutter EXF-40, like our other brush cutting attachments work great upside down too! That means trimming up those road ways from over hanging brush is a breeze! (Watch out for overhead lines!) Facebook Link Video to EXF-40 Brush Cutter -
EXR-4800 Excavator Rotary Cutter from Reaper Attachment is designed specifically for the harsh environments that excavator operators tend to find themselves in, whether it be heavy production mowing, having to heal your machine because a track came off or with our optional bolt on thumb saddle moving downed trees or other obstructions out of your path. Our EXR-4800 Excavator Rotary Mower from Reaper Attachment is up to the task. With it's heavy duty housing and it's bridge design it keeps the mower solid and stable during operation and our precision direct drive system keeps wear parts down and productivity up! Speaking of productivity this unit also comes standard equipped with our Anti Kickout Serrations to keep those trees and branches locked in the path of the blades. We understand time is money and your time is valuable so have us build your custom mount to adapt to your specific model of excavator and this is a plug and play attachment when it arrives at your door. With the ability to cut up to 6" material there is not much out there the EXR-4800 can not do. *We offer piston motor upgrades for most flow ranges when system pressures are above 3000 PSI.
-
Reaper Attachments EXF-30 Brush Cutter
The Reaper Attachments EXF-30 Industrial Brush Cutter for Excavators is built rock solid and is ideal for reclaiming, clearing and mulching brush from roadsides, fence line, ditches, driveways, fields, and much more. Designed for backhoes and compact excavators from 8000 lbs. to 22,000 lbs. The EXF-30 operates efficiently and effectively with hydraulic flows from 13 - 25 GPM. -
Reaper Attachments SS-FRW-150 formerly called the FRW-100. Renamed because of our excavator / backhoe grapple. This is for lack of a better term a BEAST. The 15k Industrial wrecker style winch was designed for this type of system, so you know it’s going to do what you need it to do when you need it to. With the 100ft of cable you are now able to reach places that your skid steer may not be able to get and pull things out. From large bundle of trees to even cars (yes we said cars). The benefits of using our Reaper Attachments SS-FRW-150 for recovery is its low ground pressure and maneuverability allowing a recovery operator to go out onto soft ground or run on top of the snow crust to get to the recovery scene where a truck could never go. This saves valuable time running winch lines not to mention greatly increasing the safety from not having to block roadways to cross pull a load. Its design also allows it to be a one man show; the operator is easily able to watch the cable from the safety of the cab as it reels back in. This allows the operator to make sure they are reeling in correctly without having to have someone outside the cab guiding the cable back in. (Note if you have never operated a winch it is advised that you have someone help you until you are familiar with the use of a winch and maintaining proper fleet angles). Our frame is also designed with multiple chain lock points for skidding logs, pulling cars, etc. these are added to help prevent the winch cable for dragging the load while tracking as cable damage could occur but also allows for chain up locations for snatch block during a complex pull. Also with its custom, new to the industry anchoring blades this assists in preventing your machine from sliding when extra heavy loads are being pulled in. It allows you to pull things that may actually be heavier than your machine. The Safety Screen is designed to prevent injury to the operator in the event of a cable failure. The SS-FRW-150 is something of a marvel and definitely a must have for both forestry work and wrecker recovery companies alike.
-
EXFM-30 MINI Flail Brush Cutter
The MINI Brush Cutter EXFM-30 flail mower is an attachment marvel and we just upped the anti-again from the original design in 2008, our all new design for 2020 is built even stronger, tighter cut profile, smoother balance and even lighter weight! This means for the bigger machines that this mower used to be to light for no longer applies. Your 6,000 lbs to 15,000 lbs machines can now run this unit making it much more diverse especially for long reach applications. Redesigned and engineered to be as strong and durable as the EXF-30 but light weight enough for some of the smaller of excavators and backhoes that previously were unable to have an attachment do to the weight of their machine. Our MINI Brush Mower EXFM-30 is powerful enough to not only cut but mulch material so no clean-up is required. By mulching the debris it breaks down faster. -
Out of stock
Reaper Attachments EX-FRW-100 Excavator Forestry Grapple 10,000 lbs. Winch
Reaper Attachments EX-FRW-100 Excavator Forestry Grapple 10,000 lbs. Winch is ready to handle the rigorous environment that is inherently associated with land clearing. This very versatile attachment allows you to do multiple functions without having to switch between attachments or machines. Manufactured from quality high strength steel and powder coated finish it's sure to offer a whole new level of performance and cost savings to your arsenal. This design is meant for compact excavators up to 18,000 LBS (Larger excavators please call) this attachment also requires a hydraulic flow of 12 gpm minimum. The bright Reaper Green color offers easy visibility for the operator and any crew around plus it just looks cool. This will also work for Backhoes. -
MSS-FRW-100 Mini Skid Steer 10k Winch
Reaper Attachments MSS-FRW-100 Mini Skid Steer Forestry and Recovery 10,000 lbs. Winch is designed for a variety of Mini Skid Steers. With its multiple attachment points, it can easily adapt to mini skid steer or full size skid steer. Manufactured from American, quality, and high strength steel with our custom color powder coated finish it's a must have for a mini skid steer.
-
Out of stockSS-SB-G Skidsteer Stump Bucket shown with optional Grapple is an aggressive, get the job done, take no prisoners kind of attachment. With its high strength steel design it easily pops those stumps out of the ground in no time at all. It is fitted with 3 replaceable bucket teeth to assist in breaking through compacted soil with ease. Being able to put the full weight and power of your skid steer behind it makes it tough enough to handle the job. The serrations along the sides are designed to use as a saw to cut thru that 1 deep root that’s holding you back or to lock onto the bottom of the stump to extract it. The serrated top grapple allows the operator to pinch down and grab on to the stump for easy removal and travel! The large mouth design of the SS-SB-G Skidsteer Stump Bucket Grapple allows for larger stumps and better grip. Our custom serrated grapple makes sure nothing moves till you’re ready for it to. With its serrated design you can pick up trees and logs that may be in its way to get to those pesky stumps. Its gripping power is surpassed by none. This is a tool every skid steer owner needs in their tool box!
-
EXR-6000-TS Bolt on Thumb Saddle
Specifications- Industrial Powder Coat
- Custom grab design
- High strength steel
Call Us Today 833-526-6380
Built to Last. Built for Life.
MADE IN THE USA
