Reaper Attachments SS-FRW-150 formerly called the FRW-100. Renamed because of our excavator / backhoe grapple. This is for lack of a better term a BEAST. The 15k Industrial wrecker style winch was designed for this type of system, so you know it’s going to do what you need it to do when you need it to. With the 100ft of cable you are now able to reach places that your skid steer may not be able to get and pull things out. From large bundle of trees to even cars (yes we said cars). The benefits of using our Reaper Attachments SS-FRW-150 for recovery is its low ground pressure and maneuverability allowing a recovery operator to go out onto soft ground or run on top of the snow crust to get to the recovery scene where a truck could never go. This saves valuable time running winch lines not to mention greatly increasing the safety from not having to block roadways to cross pull a load. Its design also allows it to be a one man show; the operator is easily able to watch the cable from the safety of the cab as it reels back in. This allows the operator to make sure they are reeling in correctly without having to have someone outside the cab guiding the cable back in. (Note if you have never operated a winch it is advised that you have someone help you until you are familiar with the use of a winch and maintaining proper fleet angles). Our frame is also designed with multiple chain lock points for skidding logs, pulling cars, etc. these are added to help prevent the winch cable for dragging the load while tracking as cable damage could occur but also allows for chain up locations for snatch block during a complex pull. Also with its custom, new to the industry anchoring blades this assists in preventing your machine from sliding when extra heavy loads are being pulled in. It allows you to pull things that may actually be heavier than your machine. The Safety Screen is designed to prevent injury to the operator in the event of a cable failure. The SS-FRW-150 is something of a marvel and definitely a must have for both forestry work and wrecker recovery companies alike.
Skid Steer 15k Forestry Winch SS-FRW-150
$8,995.00
Available on backorder
Available on backorder
Description
Skid Steer 15k Forestry Winch SS-FRW-150
The Skid Steer 15k Forestry Winch SS-FRW-150 formerly called the FRW-100. Renamed because of our excavator / backhoe grapple. This is for lack of a better term a BEAST. The 15k Industrial wrecker style winch was designed for this type of system, so you know it’s going to do what you need it to do when you need it to. With the 100ft of cable you are now able to reach places that your skid steer may not be able to get and pull things out. From large bundle of trees to even cars (yes we said cars). The benefits of using our Reaper Attachments SS-FRW-150 for recovery is its low ground pressure and maneuverability allowing a recovery operator to go out onto soft ground or run on top of the snow crust to get to the recovery scene where a truck could never go. This saves valuable time running winch lines not to mention greatly increasing the safety from not having to block roadways to cross pull a load. Its design also allows it to be a one man show; the operator is easily able to watch the cable from the safety of the cab as it reels back in. This allows the operator to make sure they are reeling in correctly without having to have someone outside the cab guiding the cable back in. (Note if you have never operated a winch it is advised that you have someone help you until you are familiar with the use of a winch and maintaining proper fleet angles). Our frame is also designed with multiple chain lock points for skidding logs, pulling cars, etc. these are added to help prevent the winch cable for dragging the load while tracking as cable damage could occur but also allows for chain up locations for snatch block during a complex pull. Also with its custom, new to the industry anchoring blades this assists in preventing your machine from sliding when extra heavy loads are being pulled in. It allows you to pull things that may actually be heavier than your machine. The Safety Screen is designed to prevent injury to the operator in the event of a cable failure. The SS-FRW-150 is something of a marvel and definitely a must have for both forestry work and wrecker recovery companies alike.
SS-FRW-150 Printable Spec Sheet
Features:
- Rated for 15,000 lbs.
- 100 feet of 1/2″ wire rope
- Line Speed of 16.7 Feet per Minute
- “Built to Last”
- Power-in and power-out operation as well as free-wheeling
- Ground engaging stabilizer blades, keeping machine level and grounded
- Safety Screen that also doubles as a holder for storage
- Engineered with heavy duty construction
- Manual Clutch System allows for cable to free spool when required
- Manufactured Here in Beautiful Washington State USA
Specifications:
- Weight 800 lbs.
- Wire Rope Length 100 ft.
- Wire Diameter 1/2″
- Pull Rating 15,000 lbs.
- Winch Shield: Yes
- Hose Rating: 4000 PSI
- Min. Machine Lift Capacity: 1300 lbs.
- Line Speed: 16.7 Feet/Minute
NOTE:
Consult your skid steer manual to insure lift capacities are not exceeded. Safety is the #1 priority. Be sure that you and your operator get familiar with the operators hand book as well as the location and instruction of all safety decals. If decals are no longer legible new ones should be purchased and installed. Can be found in Accessories.
Warning / Notice: the SS-FRW-150 is a solid welded frame design for harsh industrial applications and may impair the operators ability to open outward swinging doors on cabs of some Brands / models of skid steers due to arm / cylinder interference with the door. You must engage ground spears into the ground to open the door. In an emergency the operator may have to use the emergency window exit just as if the arms were stuck in the up position with even a bucket on. Please be aware and plan accordingly. Reaper Attachments accepts no liability direct or indirect from failure to understand and acknowledge this notice. it is the responsibility of the operator to know the working and limitations of the attachment and environment they are in. If you would like more information or have additional questions please call 833-526-6380 or email us at support@reaperattachments.
*actual result will vary dependent on available oil and pressure.
*accurate templates or diagrams specific to your machine maybe required for mounting
5 reviews for Skid Steer 15k Forestry Winch SS-FRW-150
You must be logged in to post a review.
Wes from WA –
This company gets 10 🌟 from this extremely satisfied customer. I’ve never, ever experienced such quality craftsmanship 👍🏼 and their professional customer service. I purchased the ss-frw-150 for my skid steer and it works flawlessly. You can tell it’s a quality product with all the attention to detail. Thank y’all so much, I’ll definitely be ordering from you again in the future.
Madison from PA –
Just got the winch for the skid steer cant wait to try it out
Natural State Towing –
Shout out to Reaper Attachments! We got the chance to try out our new winch box today. We’re very happy with it!
JD from AR –
OOOOOO I can’t wait to do recoveries with ours this winter!!
Bill from CA –
You guys make beautiful equipment. The engineering is top notch and the weld quality is un-believably good. Thank you!