Description
Skid Steer Rotary Brush Cutter SSR-74
Skid Steer Rotary Brush Cutter SSR-74 is an aggressive clearing attachment to add to your land clearing arsenal. With our state of the art engineering this attachment is one of the most well balanced, hardest hitting clearing mower out there. Nothing compares to this skidsteer attachment. The blade design is a piece of CNC machined art work with a designed purpose at every turn meant to reduce projectiles while increasing the efficiency to clear everything in its path with ease. With its clear bullet rated poly-carbonate shield the operator can safely see what is in the cutting path as it is approached. The Anti- Kick Out Serration (See Above Photo) look cool but they are actually designed and placed to grab and hold trees & brush so it can be cut properly instead of being kicked out from blade impact much like a ratchet system. A front gate cover can also be purchased to cover the opening if you’re in an area where projectiles are a major concern or working with just small brush and need to mulch material finer. Reaper Attachments SSR-74 Brush Cutter, like all the products we manufacture and sell from the top to bottom this is precision quality craftsmanship at its finest with attention to detail from every angle all the way down to the hand inspected zinc plated drive housing.
Youtube Video Link (15″ Alder DONT TRY THIS AT HOME)
Facebook Video Link
SSR-74 Printable Spec Sheet
Features:
- Direct Drive System which reduces wear parts
- Serrated Anti kickout Edging for increased efficiency
- Clear Bullet resistant poly-carbonate viewing guard
- Reaper Green high vis Industrial Powder Coat
- Dual 12 lbs Blades for optimal Brush Clearing
- Custom State of the art Balanced blade carrier
- Zinc plated bearing housing to increase life
- Manufactured Here in Beautiful Washington State USA
Specifications:
- Weight without Gate: 1816 lbs.
- Weight With Gate: 2016 lbs.
- Overall Width: 78″
- Overall Depth: 78″
- Cutter Width: 74″
- Height: 32″
- Hydraulic Gear Motor 32-40 GPM”
- Optional High Flow Hydraulic Piston Motor 32-40 GPM
- Drive Spindle is Precision CNC Machined 4140 Heat Treated
- 1″ – T1 CNC machined Blade Carrier
- 2 -12 LB Blades
- Housing Material is high strength steel ranging from 1/4″ to 5/8″
- 3″ by 4” high strength structural steel tube upper structure
- Bearing/Seal: Viton double guarded shaft seal
- Vision Window: 1/2″ Bullet resistant poly-carbonate shield
- Capacity: up to 8″ Thick Material*
- Case Drain Required
NOTE:
Rotary Brush Cutters can be very dangerous. Front poly-carbonate shielding is highly recommended for operators safety. Projectile throw must be taken into account for the safety of others. Contact your local skid steer dealer for cab shielding recommendations.
Consult your skidsteer manual to insure lift capacities are not exceeded. Safety is the #1 priority. Be sure that you and your operator get familiar with the operators hand book as well as the location and instruction of all safety decals. If decals are no longer legible new ones should be purchased and installed.
*actual result will vary dependent on available oil and pressure.
Justin from LA –
I just bought my SSR-74 for my high flow JD 333G. I only have a about 2 hours on it so far but I will log a lot more this weekend, so I’ll try and update this review at a later time if possible. If you are looking for a heavy built unit with not only a rugged structure but great craftsmanship as well then I highly recommended giving Reaper a serious look. From the welds to the powder coat everything looks perfect. If your on the fence with deciding, give them a call and most likely just dealing with the people up there will solve that problem. I have had excellent service from Reaper so far, Marie answered any possible questions I had and actually made notes on our conversations to make sure we could pick up where we left off when I’d call back. If she didn’t know an answer she would go ask one of the techs or get them on the phone with me, and they were very pleasant to speak with, which is saying something because we all know how we feel about being handed a phone to answer a dumb question while we are working. I had even mentioned a shirt design that I thought they should do for the company, and they are actually making it because of my suggestion. That may not seem like a big deal but to me if a company is willing to listen to customers feed back and suggestions on something as mundane as a shirt design and follow through with it then I feel confident they will listen if I have an actual issue or need. This is a much longer review then I intended but I hope this helps ease some possible concerns with looking at a new company to try.
Here’s a link to an “unboxing” I did of the unit. I don’t like making videos but after their support I sucked it up and did it.
https://youtu.be/gPt8SX7-BSg
Kenny from AR –
Best one made by far.
Gary from WA –
Cody and his team are amazing and do great work. Top notch product and service.
Dylan from AR –
Hands down superior quality. 👌